[hcflinux] problems receiving faxes on conexant HCF

Mon May 12 01:21:36 EDT 2003

my driver version is  hcfpcimodem-0.99lnxtbeta03042700
my kernel is 2.4.20 vanilla self compiled
my distro is redhat 8.0

i am using hylafax version 4.1.5

i have problems with receiving faxes seems there is some problem with 
protocol or what (strange things)
i have also old external modem and with this machine all goes just well

please I NEED help

thanks a lot for any suggestion

Pavel Sorejs

here is the log from hylafax: (sorry for long post)

May 11 13:20:10.89: [ 8950]: SESSION BEGIN 00001559 420220562023
May 11 13:20:10.89: [ 8950]: HylaFAX (tm) Version 4.1.5
May 11 13:20:10.89: [ 8950]: <-- [4:ATA\r]
May 11 13:20:17.86: [ 8950]: --> [7:CONNECT]
May 11 13:20:17.86: [ 8950]: ANSWER: FAX CONNECTION  DEVICE '/dev/modem'
May 11 13:20:17.86: [ 8950]: RECV FAX: begin
May 11 13:20:17.86: [ 8950]: <-- data [23]
May 11 13:20:17.86: [ 8950]: <-- data [2]
May 11 13:20:19.44: [ 8950]: --> [7:CONNECT]
May 11 13:20:19.44: [ 8950]: <-- data [10]
May 11 13:20:19.44: [ 8950]: <-- data [2]
May 11 13:20:20.12: [ 8950]: --> [2:OK]
May 11 13:20:20.12: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:20.52: [ 8950]: --> [7:CONNECT]
May 11 13:20:21.60: [ 8950]: --> [2:OK]
May 11 13:20:21.60: [ 8950]: REMOTE wants 14400 bit/s
May 11 13:20:21.60: [ 8950]: REMOTE wants page width 1728 pixels in 215 mm
May 11 13:20:21.60: [ 8950]: REMOTE wants unlimited page length
May 11 13:20:21.60: [ 8950]: REMOTE wants 3.85 line/mm
May 11 13:20:21.60: [ 8950]: REMOTE wants 2-D MR
May 11 13:20:21.60: [ 8950]: RECV training at v.17 14400 bit/s
May 11 13:20:21.60: [ 8950]: <-- [11:AT+FRM=145\r]
May 11 13:20:23.30: [ 8950]: --> [7:CONNECT]
May 11 13:20:24.82: [ 8950]: RECV: TCF 0 bytes, 0% non-zero, 0 zero-run
May 11 13:20:24.82: [ 8950]: RECV: reject TCF (zero run too short, min 1800)
May 11 13:20:24.84: [ 8950]: --> [10:NO CARRIER]
May 11 13:20:24.84: [ 8950]: DELAY 75 ms
May 11 13:20:24.92: [ 8950]: <-- [9:AT+FTH=3\r]
May 11 13:20:25.26: [ 8950]: --> [7:CONNECT]
May 11 13:20:25.26: [ 8950]: <-- data [3]
May 11 13:20:25.26: [ 8950]: <-- data [2]
May 11 13:20:26.66: [ 8950]: --> [2:OK]
May 11 13:20:26.66: [ 8950]: TRAINING failed
May 11 13:20:26.66: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:27.08: [ 8950]: --> [7:CONNECT]
May 11 13:20:28.16: [ 8950]: --> [2:OK]
May 11 13:20:28.16: [ 8950]: REMOTE wants 12000 bit/s
May 11 13:20:28.16: [ 8950]: REMOTE wants page width 1728 pixels in 215 mm
May 11 13:20:28.16: [ 8950]: REMOTE wants unlimited page length
May 11 13:20:28.16: [ 8950]: REMOTE wants 3.85 line/mm
May 11 13:20:28.16: [ 8950]: REMOTE wants 2-D MR
May 11 13:20:28.16: [ 8950]: RECV training at v.17 12000 bit/s
May 11 13:20:28.16: [ 8950]: <-- [11:AT+FRM=121\r]
May 11 13:20:29.85: [ 8950]: --> [7:CONNECT]
May 11 13:20:31.37: [ 8950]: RECV: TCF 5 bytes, 0% non-zero, 0 zero-run
May 11 13:20:31.37: [ 8950]: RECV: reject TCF (zero run too short, min 1500)
May 11 13:20:31.39: [ 8950]: --> [10:NO CARRIER]
May 11 13:20:31.39: [ 8950]: DELAY 75 ms
May 11 13:20:31.47: [ 8950]: <-- [9:AT+FTH=3\r]
May 11 13:20:31.81: [ 8950]: --> [7:CONNECT]
May 11 13:20:31.81: [ 8950]: <-- data [3]
May 11 13:20:31.81: [ 8950]: <-- data [2]
May 11 13:20:33.21: [ 8950]: --> [2:OK]
May 11 13:20:33.21: [ 8950]: TRAINING failed
May 11 13:20:33.21: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:33.63: [ 8950]: --> [7:CONNECT]
May 11 13:20:34.69: [ 8950]: --> [2:OK]
May 11 13:20:34.69: [ 8950]: REMOTE wants 9600 bit/s
May 11 13:20:34.69: [ 8950]: REMOTE wants page width 1728 pixels in 215 mm
May 11 13:20:34.69: [ 8950]: REMOTE wants unlimited page length
May 11 13:20:34.69: [ 8950]: REMOTE wants 3.85 line/mm
May 11 13:20:34.69: [ 8950]: REMOTE wants 2-D MR
May 11 13:20:34.69: [ 8950]: RECV training at v.17 9600 bit/s
May 11 13:20:34.69: [ 8950]: <-- [10:AT+FRM=97\r]
May 11 13:20:36.40: [ 8950]: --> [7:CONNECT]
May 11 13:20:37.92: [ 8950]: RECV: TCF 0 bytes, 0% non-zero, 0 zero-run
May 11 13:20:37.92: [ 8950]: RECV: reject TCF (zero run too short, min 1200)
May 11 13:20:37.94: [ 8950]: --> [10:NO CARRIER]
May 11 13:20:37.94: [ 8950]: DELAY 75 ms
May 11 13:20:38.02: [ 8950]: <-- [9:AT+FTH=3\r]
May 11 13:20:38.36: [ 8950]: --> [7:CONNECT]
May 11 13:20:38.36: [ 8950]: <-- data [3]
May 11 13:20:38.36: [ 8950]: <-- data [2]
May 11 13:20:39.76: [ 8950]: --> [2:OK]
May 11 13:20:39.76: [ 8950]: TRAINING failed
May 11 13:20:39.76: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:40.18: [ 8950]: --> [7:CONNECT]
May 11 13:20:41.26: [ 8950]: --> [2:OK]
May 11 13:20:41.26: [ 8950]: REMOTE wants 2400 bit/s
May 11 13:20:41.26: [ 8950]: REMOTE wants page width 1728 pixels in 215 mm
May 11 13:20:41.26: [ 8950]: REMOTE wants unlimited page length
May 11 13:20:41.26: [ 8950]: REMOTE wants 3.85 line/mm
May 11 13:20:41.26: [ 8950]: REMOTE wants 2-D MR
May 11 13:20:41.26: [ 8950]: RECV training at v.17 7200 bit/s
May 11 13:20:41.26: [ 8950]: <-- [10:AT+FRM=73\r]
May 11 13:20:42.92: [ 8950]: --> [7:CONNECT]
May 11 13:20:44.46: [ 8950]: RECV: TCF 648 bytes, 54% non-zero, 1 zero-run
May 11 13:20:44.46: [ 8950]: RECV: reject TCF (too many non-zero, max 10%)
May 11 13:20:44.46: [ 8950]: RECV: reject TCF (zero run too short, min 300)
May 11 13:20:44.48: [ 8950]: --> [10:NO CARRIER]
May 11 13:20:44.48: [ 8950]: DELAY 75 ms
May 11 13:20:44.56: [ 8950]: <-- [9:AT+FTH=3\r]
May 11 13:20:44.90: [ 8950]: --> [7:CONNECT]
May 11 13:20:44.90: [ 8950]: <-- data [3]
May 11 13:20:44.90: [ 8950]: <-- data [2]
May 11 13:20:46.30: [ 8950]: --> [2:OK]
May 11 13:20:46.30: [ 8950]: TRAINING failed
May 11 13:20:46.30: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:46.72: [ 8950]: --> [7:CONNECT]
May 11 13:20:47.80: [ 8950]: --> [2:OK]
May 11 13:20:47.80: [ 8950]: REMOTE wants 4800 bit/s
May 11 13:20:47.80: [ 8950]: REMOTE wants page width 1728 pixels in 215 mm
May 11 13:20:47.80: [ 8950]: REMOTE wants unlimited page length
May 11 13:20:47.80: [ 8950]: REMOTE wants 3.85 line/mm
May 11 13:20:47.80: [ 8950]: REMOTE wants 2-D MR
May 11 13:20:47.80: [ 8950]: RECV training at v.27ter 4800 bit/s
May 11 13:20:47.80: [ 8950]: <-- [10:AT+FRM=48\r]
May 11 13:20:48.85: [ 8950]: --> [7:CONNECT]
May 11 13:20:50.33: [ 8950]: RECV: TCF 0 bytes, 0% non-zero, 0 zero-run
May 11 13:20:50.33: [ 8950]: RECV: reject TCF (zero run too short, min 600)
May 11 13:20:50.35: [ 8950]: --> [10:NO CARRIER]
May 11 13:20:50.35: [ 8950]: DELAY 75 ms
May 11 13:20:50.43: [ 8950]: <-- [9:AT+FTH=3\r]
May 11 13:20:50.77: [ 8950]: --> [7:CONNECT]
May 11 13:20:50.77: [ 8950]: <-- data [3]
May 11 13:20:50.77: [ 8950]: <-- data [2]
May 11 13:20:52.17: [ 8950]: --> [2:OK]
May 11 13:20:52.17: [ 8950]: TRAINING failed
May 11 13:20:52.17: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:52.59: [ 8950]: --> [7:CONNECT]
May 11 13:20:53.67: [ 8950]: --> [2:OK]
May 11 13:20:53.67: [ 8950]: REMOTE wants 2400 bit/s
May 11 13:20:53.67: [ 8950]: REMOTE wants page width 1728 pixels in 215 mm
May 11 13:20:53.67: [ 8950]: REMOTE wants unlimited page length
May 11 13:20:53.67: [ 8950]: REMOTE wants 3.85 line/mm
May 11 13:20:53.67: [ 8950]: REMOTE wants 2-D MR
May 11 13:20:53.67: [ 8950]: RECV training at v.27ter fallback mode 2400 bit/s
May 11 13:20:53.67: [ 8950]: <-- [10:AT+FRM=24\r]
May 11 13:20:54.96: [ 8950]: --> [7:CONNECT]
May 11 13:20:56.42: [ 8950]: RECV: TCF 2 bytes, 0% non-zero, 0 zero-run
May 11 13:20:56.42: [ 8950]: RECV: reject TCF (zero run too short, min 300)
May 11 13:20:56.44: [ 8950]: --> [10:NO CARRIER]
May 11 13:20:56.44: [ 8950]: DELAY 75 ms
May 11 13:20:56.52: [ 8950]: <-- [9:AT+FTH=3\r]
May 11 13:20:56.86: [ 8950]: --> [7:CONNECT]
May 11 13:20:56.86: [ 8950]: <-- data [3]
May 11 13:20:56.86: [ 8950]: <-- data [2]
May 11 13:20:58.26: [ 8950]: --> [2:OK]
May 11 13:20:58.26: [ 8950]: TRAINING failed
May 11 13:20:58.26: [ 8950]: <-- [9:AT+FRH=3\r]
May 11 13:20:58.62: [ 8950]: --> [7:CONNECT]
May 11 13:20:59.60: [ 8950]: --> [2:OK]
May 11 13:20:59.60: [ 8950]: RECV FAX: RSPREC error/got DCN
May 11 13:20:59.60: [ 8950]: RECV FAX: end
May 11 13:20:59.60: [ 8950]: SESSION END