[hcflinux] AOpen FM56-PX

[Scott]

I have just purchased an aopen FM56-PX modem.

I wish to use this to answer incoming calls and run programs depending on what dtmf tones are entered ( e.g. vgetty will run "program *123#" )

What features do I require to make dtmf tones work?  Do I need voice to be working?

I do not wish to use the modem for data connections so can I use the free driver to get these features?  In the future I may also wish to play with voice.  Does the free driver cover voice?

I installed the free driver and the following is what I got:

listmodem:
=============================================================
= RESULT OF MODEM QUERY =
=============================================================
MODEM #1:
PCI CONFIGURATION INFORMATION READ:
Vendor Id : 14F1
Device Id : 10B6
Revision Id : 1
Sub Vendor Id : A0A0
Sub Device Id : 00C2
DEDUCED INFORMATION:
Vendor Name : CONEXANT
Device Name : HCF Data/Fax/RemoteTam/Speakerphone
Modem Type : HCF
Download Site : http://www.linuxant.com/

ATI6:
DP Part 73
DP Rev BA
V90 SPX RAM Ver 65
V90 CTL RAM Ver 65
OK

error log:
10/08 19:23:29 CF0 vgetty: experimental test release 0.9.33 / 26Dec02
10/08 19:23:29 CF0 mgetty: experimental test release 1.1.30-Dec16
10/08 19:23:29 CF0 reading generic configuration from config file /etc/mgetty+sendfax/voice.conf
10/08 19:23:29 CF0 reading program vgetty configuration from config file /etc/mgetty+sendfax/voice.conf
10/08 19:23:29 CF0 reading port ttySHCF0 configuration from config file /etc/mgetty+sendfax/voice.conf
10/08 19:23:29 CF0 check for lockfiles
10/08 19:23:29 CF0 locking the line
10/08 19:23:31 CF0 lowering DTR to reset Modem
10/08 19:23:31 CF0 send: \dATQ0V1H0[0d]
10/08 19:23:32 CF0 waiting for ``OK'' ** found **
10/08 19:23:32 CF0 send: ATS0=0Q0&D3&C1[0d]
10/08 19:23:32 CF0 waiting for ``OK'' ** found **
10/08 19:23:32 CF0 mdm_send: 'ATI'
10/08 19:23:32 CF0 Generic Rockwell modem (56000)
10/08 19:23:32 CF0 mdm_send: 'ATI3'
10/08 19:23:32 CF0 mdm_send: 'ATI4'
10/08 19:23:32 CF0 additional info: 'Conexant Octopus HCF V.92 PCI Modem'
10/08 19:23:32 CF0 modem quirks: 0004
10/08 19:23:32 CF0 mdm_send: 'AT+FCLASS=2' -> ERROR
10/08 19:23:32 CF0 mdm_send: 'AT+FCLASS=2.0' -> ERROR
10/08 19:23:33 CF0 mdm_send: 'AT+FCLASS=2' -> ERROR
10/08 19:23:33 CF0 detecting voice modem type
10/08 19:23:34 CF0 Rockwell detected
10/08 19:23:46 CF0 vgetty: timeout while reading character from voice modem
10/08 19:23:46 CF0 initializing ROCKWELL voice modem
10/08 19:23:46 CF0 vgetty: Modem returned ERROR
10/08 19:23:46 CF0 can't set silence period
10/08 19:23:46 CF0 vgetty: Modem returned ERROR
10/08 19:23:46 CF0 can't set transmit gain
10/08 19:23:46 CF0 vgetty: Modem returned ERROR
10/08 19:23:46 CF0 can't set record gain
10/08 19:23:47 CF0 vgetty: Modem returned ERROR
10/08 19:23:47 CF0 can't disable silence deletion
10/08 19:23:47 CF0 vgetty: Modem returned ERROR
10/08 19:23:47 CF0 can't set DLE responses
10/08 19:23:47 CF0 vgetty: Modem returned ERROR
10/08 19:23:47 CF0 can't set silence threshold
10/08 19:23:47 CF0 vgetty: Modem returned ERROR
10/08 19:23:48 CF0 waiting...

It seems from the log that the voice portion may not work.  Does this mean DTMF will not work?  I will not be able to connect to a phone line until tomorrow to test anything so any insight will be greatly appreciated.

Thanks in advance.

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxant.com/pipermail/hcflinux/attachments/20031008/130f88c4/attachment.htm