[hcflinux] AOpen FM56-PX

[Scott]

I have now purchased the full version of the driver and it does not seem
compatible with vgetty.  From what I can tell, vgetty identifies it as a
Rockwell model modem and issues the wrong AT commands to it.

Is there something I am missing?

Scott

----- Original Message ----- 
From: "Linuxant support" <support at linuxant.com>
To: "Scott" <Scott at notch.ca>; <hcflinux at lists.linuxant.com>
Sent: Tuesday, October 21, 2003 3:50 AM
Subject: Re: [hcflinux] AOpen FM56-PX


> Hi,
>
> the full version of the driver is required for voice support. Also, you
need
> a modem with datapump version 73, which seems to be your case.
>
> We did not do extensive testing of the voice functionnality, but it should
> work.
>
> Regards,
>
> Jean-Simon Durand
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
>
>
> ----- Original Message ----- 
> From: "Scott" <Scott at notch.ca>
> To: <hcflinux at lists.linuxant.com>
> Sent: Wednesday, October 08, 2003 7:37 PM
> Subject: [hcflinux] AOpen FM56-PX
>
>
> I have just purchased an aopen FM56-PX modem.
>
> I wish to use this to answer incoming calls and run programs depending on
> what dtmf tones are entered ( e.g. vgetty will run "program *123#" )
>
> What features do I require to make dtmf tones work?  Do I need voice to be
> working?
>
> I do not wish to use the modem for data connections so can I use the free
> driver to get these features?  In the future I may also wish to play with
> voice.  Does the free driver cover voice?
>
> I installed the free driver and the following is what I got:
>
> listmodem:
> =============================================================
> = RESULT OF MODEM QUERY =
> =============================================================
> MODEM #1:
> PCI CONFIGURATION INFORMATION READ:
> Vendor Id : 14F1
> Device Id : 10B6
> Revision Id : 1
> Sub Vendor Id : A0A0
> Sub Device Id : 00C2
> DEDUCED INFORMATION:
> Vendor Name : CONEXANT
> Device Name : HCF Data/Fax/RemoteTam/Speakerphone
> Modem Type : HCF
> Download Site : http://www.linuxant.com/
>
> ATI6:
> DP Part 73
> DP Rev BA
> V90 SPX RAM Ver 65
> V90 CTL RAM Ver 65
> OK
>
> error log:
> [...]
>
> It seems from the log that the voice portion may not work.  Does this mean
> DTMF will not work?  I will not be able to connect to a phone line until
> tomorrow to test anything so any insight will be greatly appreciated.
>
> Thanks in advance.
>
> Scott
>