[hcflinux] SuSE 9.0 + full driver

[snaK9]

Ah, the upgrade had broken my firewall configuration. The driver works
perfectly now, sorry to have been a bother.

----- Original Message ----- 
From: "Linuxant support" <support at linuxant.com>
To: "ninja" <shoner at bigfoot.com>; <hcflinux at lists.linuxant.com>
Sent: Monday, December 15, 2003 9:43 PM
Subject: Re: [hcflinux] SuSE 9.0 + full driver


> Hi,
>
> do you have a complete log of the connection attempt?
>
> Kppp has an option to get a log window during the connection. "vwdial"
sends
> it's log output in '/var/log/messages'.
>
> I suggest this initialization string:
>
> AT &F +ER=1; +DR=1
>
> If you can test with a terminal software like 'minicom', it's easier to
see
> if the problem is related to the PPP software's connection script or the
> modem.
>
> Regards,
>
> Jean-Simon Durand
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
>
>
> ----- Original Message ----- 
> From: "ninja" <shoner at bigfoot.com>
> To: <hcflinux at lists.linuxant.com>
> Sent: Sunday, December 14, 2003 9:19 AM
> Subject: [hcflinux] SuSE 9.0 + full driver
>
>
> I've just upgraded to SuSE 9.0 from 8.2 and I am now using the
> k_athlon-2.4.21-144 kernel. Before the upgrade, I was happily using
> hcfpcimodem-0.99lnxtbeta03042700k2.4.20_4GB_athlon-1suse.i586.rpm with
> my "Conexant HCF 56k Data/Fax Modem (rev 08)".
>
> I've installed the
> hcfpcimodem-1.00lnxt03112100full_k2.4.21_144_athlon-1suse.i586.rpm
> package and entered my license details with hcfpciconfig. It dials and
> connects to my ISP okay using kinternet but, once the link is
> established, I can't send or receive any data. The kinternet status icon
> still shows connecting (lightning bolt) even though the log shows that
> it's set a new remote IP address. This is the exact same behaviour that
> I had when I tried the free drivers and was connecting at 57600 (my ISP
> doesn't allow you to connect at 14400 but I did try).
>
> Help please.
>
>