[hcflinux] FW: HCFPCI modem hangs after Failed to properly detect
high-speed data carrier
rolland mich
mk67 at wanadoo.fr
Tue Dec 20 00:56:54 EST 2005
Le Samedi 17 Décembre 2005 21:12, Olivier Elfferich a écrit :
It doesn't matter in fact, try the hint with hylafax through opennoffice and
kdeprintfax. Just config kdeprintfax for hylafax instead of efax.
Good luck.
> Our modem:
> 01:05.0 Serial controller: Rockwell International HCF 56k Data/Fax Modem
> (rev 01)
>
> Os Fedora core 4
>
> Modem config
>
> CountryCode: 32
> AreaCode: 03
> FAXNumber: 03.633.02.34
> #LongDistancePrefix: 0
> #InternationalPrefix: 0
> DialStringRules: etc/dialrules
> ServerTracing: 1
> SessionTracing: 11
> RecvFileMode: 0644
> LogFileMode: 0644
> DeviceMode: 0666
> RingsBeforeAnswer: 2
> SpeakerVolume: off
> GettyArgs: "-h %l dx_%s"
> LocalIdentifier: NothingSetup
> TagLineFont: etc/lutRS18.pcf
> TagLineFormat: "From %%l|%c|Page %%P of %%T"
> MaxRecvPages: 25
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType: Class1 # use this to supply a hint
> ModemRate: 19200 # rate for DCE-DTE communication
> ModemFlowControl: rtscts # default
> #
> ModemNoFlowCmd: AT&K0 # setup no flow control
> ModemHardFlowCmd: AT&K3 # setup hardware flow control
> ModemSoftFlowCmd: AT&K4 # setup software flow control
> ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
> ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or
> not)
> #
> ModemMfrQueryCmd: !Rockwell
> ModemModelQueryCmd: !RC288DPi
> ModemRevQueryCmd: ATI3 # product information
> #
> ModemResetCmds: AT&FX1
> ModemDialCmd: ATDT%s
>
>
> Whe have trouble with recieving faxes.
>
> Dec 16 12:58:56.37: [21588]: SESSION BEGIN 000000168 036330234
> Dec 16 12:58:56.37: [21588]: HylaFAX (tm) Version 4.2.3rc1
> Dec 16 12:58:56.37: [21588]: <-- [4:ATA\r]
> Dec 16 12:59:02.77: [21588]: --> [7:CONNECT]
> Dec 16 12:59:02.77: [21588]: ANSWER: FAX CONNECTION DEVICE '/dev/ttySHCF0'
> Dec 16 12:59:02.77: [21588]: RECV FAX: begin
> Dec 16 12:59:02.77: [21588]: <-- data [35]
> Dec 16 12:59:02.77: [21588]: <-- data [2]
> Dec 16 12:59:04.72: [21588]: --> [7:CONNECT]
> Dec 16 12:59:04.72: [21588]: <-- data [23]
> Dec 16 12:59:04.72: [21588]: <-- data [2]
> Dec 16 12:59:05.46: [21588]: --> [7:CONNECT]
> Dec 16 12:59:05.46: [21588]: <-- data [13]
> Dec 16 12:59:05.46: [21588]: <-- data [2]
> Dec 16 12:59:06.20: [21588]: --> [2:OK]
> Dec 16 12:59:06.20: [21588]: <-- [9:AT+FRH=3\r]
> Dec 16 12:59:06.54: [21588]: --> [7:CONNECT]
> Dec 16 12:59:08.08: [21588]: --> [2:OK]
> Dec 16 12:59:08.08: [21588]: REMOTE TSI "+0450038576"
> Dec 16 12:59:08.08: [21588]: <-- [9:AT+FRH=3\r]
> Dec 16 12:59:08.11: [21588]: --> [7:CONNECT]
> Dec 16 12:59:08.35: [21588]: --> [2:OK]
> Dec 16 12:59:08.35: [21588]: REMOTE wants 14400 bit/s
> Dec 16 12:59:08.35: [21588]: REMOTE wants A4 page width (215 mm)
> Dec 16 12:59:08.35: [21588]: REMOTE wants unlimited page length
> Dec 16 12:59:08.35: [21588]: REMOTE wants 3.85 line/mm
> Dec 16 12:59:08.35: [21588]: REMOTE wants 2-D MMR
> Dec 16 12:59:08.35: [21588]: REMOTE wants T.30 Annex A, 256-byte ECM
> Dec 16 12:59:08.35: [21588]: RECV training at v.17 14400 bit/s
> Dec 16 12:59:08.35: [21588]: <-- [11:AT+FRM=145\r]
> Dec 16 12:59:10.07: [21588]: --> [7:CONNECT]
> Dec 16 12:59:11.59: [21588]: RECV: TCF 2645 bytes, 1% non-zero, 2604
> zero-run
> Dec 16 12:59:11.61: [21588]: --> [10:NO CARRIER]
> Dec 16 12:59:11.61: [21588]: <-- [9:AT+FRS=7\r]
> Dec 16 12:59:11.75: [21588]: --> [2:OK]
> Dec 16 12:59:11.75: [21588]: TRAINING succeeded
> Dec 16 12:59:11.75: [21588]: <-- [9:AT+FTH=3\r]
> Dec 16 12:59:12.09: [21588]: --> [7:CONNECT]
> Dec 16 12:59:12.09: [21588]: <-- data [3]
> Dec 16 12:59:12.09: [21588]: <-- data [2]
> Dec 16 12:59:13.40: [21588]: --> [2:OK]
> Dec 16 12:59:13.40: [21588]: <-- [11:AT+FRM=146\r]
> Dec 16 12:59:20.41: [21588]: <-- data [1]
> Dec 16 12:59:20.61: [21588]: MODEM <Timeout>
> Dec 16 12:59:20.61: [21588]: <-- [9:AT+FRH=3\r]
> Dec 16 12:59:20.80: [21588]: --> [7:CONNECT]
> Dec 16 12:59:22.78: [21588]: --> [5:ERROR]
> Dec 16 12:59:22.78: [21588]: MODEM Command error
> Dec 16 12:59:22.78: [21588]: FCS error
> Dec 16 12:59:22.78: [21588]: <-- [9:AT+FRS=7\r]
> Dec 16 12:59:27.46: [21588]: --> [2:OK]
> Dec 16 12:59:27.46: [21588]: <-- [9:AT+FTH=3\r]
> Dec 16 12:59:27.80: [21588]: --> [7:CONNECT]
> Dec 16 12:59:27.80: [21588]: <-- data [3]
> Dec 16 12:59:27.80: [21588]: <-- data [2]
> Dec 16 12:59:29.11: [21588]: --> [2:OK]
> Dec 16 12:59:29.11: [21588]: RECV send CRP (command repeat)
> Dec 16 12:59:29.11: [21588]: <-- [9:AT+FRH=3\r]
> Dec 16 12:59:29.40: [21588]: --> [7:CONNECT]
> Dec 16 12:59:30.52: [21588]: --> [2:OK]
> Dec 16 12:59:30.52: [21588]: RECV recv PPS (partial page signal)
> Dec 16 12:59:30.52: [21588]: RECV recv EOP (no more pages or documents)
> Dec 16 12:59:30.52: [21588]: RECV received 17 frames of block 1 of page 1
> Dec 16 12:59:30.52: [21588]: <-- [9:AT+FRS=7\r]
> Dec 16 12:59:30.67: [21588]: --> [2:OK]
> Dec 16 12:59:30.67: [21588]: <-- [9:AT+FTH=3\r]
> Dec 16 12:59:31.01: [21588]: --> [7:CONNECT]
> Dec 16 12:59:31.01: [21588]: <-- data [35]
> Dec 16 12:59:31.01: [21588]: <-- data [2]
> Dec 16 12:59:33.34: [21588]: --> [2:OK]
> Dec 16 12:59:33.34: [21588]: RECV send PPR (partial page request)
> Dec 16 12:59:33.34: [21588]: <-- [11:AT+FRM=146\r]
> Dec 16 12:59:40.34: [21588]: <-- data [1]
> Dec 16 12:59:40.55: [21588]: MODEM <Timeout>
> Dec 16 12:59:40.55: [21588]: <-- [9:AT+FRH=3\r]
> Dec 16 12:59:40.77: [21588]: --> [7:CONNECT]
> Dec 16 12:59:43.63: [21588]: --> [5:ERROR]
> Dec 16 12:59:43.63: [21588]: MODEM Command error
> Dec 16 12:59:43.63: [21588]: FCS error
> Dec 16 12:59:43.63: [21588]: <-- [9:AT+FRS=7\r]
> Dec 16 13:00:13.64: [21588]: MODEM <Timeout>
> Dec 16 13:00:13.64: [21588]: <-- data [1]
> Dec 16 13:00:13.84: [21588]: MODEM <Timeout>
> Dec 16 13:00:13.84: [21588]: Failed to properly detect high-speed data
> carrier.
> Dec 16 13:00:13.84: [21588]: RECV FAX (000000168): recvq/fax000000066.tif
> from +0450038576, route to <unspecified>, 0 pages in 1:11
> Dec 16 13:00:13.84: [21588]: RECV FAX: Failed to properly detect high-speed
> data carrier.
> Dec 16 13:00:13.84: [21588]: <-- [9:AT+FTH=3\r]
> Dec 16 13:00:21.40: [21588]: --> [0:]
> Dec 16 13:00:21.40: [21588]: RECV FAX (000000168): session with +0450038576
> terminated abnormally: Failed to properly detect high-speed data carrier.
> Dec 16 13:00:21.40: [21588]: RECV FAX: bin/faxrcvd "recvq/fax000000066.tif"
> "ttySHCF0" "000000168" "Failed to properly detect high-speed data carrier."
> Dec 16 13:00:21.40: [21588]: RECV FAX: end
> Dec 16 13:00:21.40: [21588]: SESSION END
>
> Afther that hylafax sends a report:
>
> The HylaFAX software thinks that there is a problem with the modem
> on device /dev/ttySHCF0 that needs attention; repeated attempts to
> initialize the modem have failed.
>
> Consult the server trace logs for more information on what is happening.
>
> You will be notified again after 5 minutes if the problem persists.
>
>
>
>
> After that whe need to do a rchcfpci stop/start, and restart hylafax to get
> it working agian.
--
M.Rolland
More information about the hcflinux
mailing list