[hsflinux] NO DIALTONE HSF

[Marc Boucher]

Try the HCF driver (latest version from today)

Some 127a:1025 modems seem to be HSF, others HCF.

Marc

On Mon, May 06, 2002 at 09:51:15AM +0800, Robert SHEN wrote:
> The problem is without ATX3, I got a NO DIALTONE message, therefore I tried
> to use the ATX3 as suggested in the FAQ, but cannot work neither.
> 
> ----- Original Message -----
> From: "sapo" <sergiomb at net.sapo.pt>
> To: "Robert SHEN" <shen at hkug.net>
> Sent: Monday, May 06, 2002 5:34 AM
> Subject: RE: [hsflinux] NO DIALTONE HSF
> 
> 
> > If you use ATX3 it is impossible get a NO DIALTONE because you dont wait
> for
> > dial tone
> >
> > > -----Mensagem original-----
> > > De: hsflinux-admin at lists.mbsi.ca [mailto:hsflinux-admin at lists.mbsi.ca]Em
> > > nome de Robert SHEN
> > > Enviada: sexta-feira, 3 de Maio de 2002 1:05
> > > Para: hsflinux at lists.mbsi.ca
> > > Assunto: [hsflinux] NO DIALTONE HSF
> > >
> > >
> > > I have installed the latest hsflinux drivers 4.06.06.02 from
> > > www.msbi.ca/cnxtlindrv on mu linux 7.2. The installation process was
> > > successfull, but when I tried to dial, the response is NO DIALTONE, I
> > > attempted to use the command ATX3 in vain.
> > >
> > > Modem config using a listmodem.sh downloaded from the internet
> > > Vendor Id : 127A
> > > Device Id : 1025
> > >
> > > it is a Conexant HSF modem
> > >
> > > but when I typed lspci, it shows a Rockwell International HCF modem
> > >
> > > why? any suggestion?
> > >
> > > _______________________________________________
> > > hsflinux mailing list
> > > hsflinux at lists.mbsi.ca
> > > http://www.mbsi.ca/mailman/listinfo/hsflinux
> > >
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hsflinux
>