[hsflinux] MC97 Problems...

[Marc Boucher]

You seem to have a Lucent AC97 modem. Our driver only supports
Conexant devices.

Marc

On Wed, Sep 25, 2002 at 12:34:50PM -0400, Emilio Recio wrote:
> So I recompiled from source, and I get the same problem with com ctrl. 
> If someone can explain what the ERROR: below means, I would greatly 
> appreciate it. Does it mean that the my modem on the mini-book pc is 
> completely useless?
> 
> PCI: Found IRQ 10 for device 00:1f.6
> PCI: Sharing IRQ 10 with 00:1f.3
> PCI: Sharing IRQ 10 with 00:1f.5
> PCI: Setting latency timer of device 00:1f.6 to 64
> HSF: MC97 VendorId1=0x5349 VendorId2=0x4c27
> ERROR: did not find a supported MC97 controller ! (0x5349:0x4c27)
> hsf_request_port: ComCtrlOpen failed, r=1!
> 
> Note: I am not using the audio device at all.
> 
> 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 05)
> 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
> 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
> 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
> 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
> 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
> 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio 
> (rev 05)
> 00:1f.6 Modem: Intel Corp. 82801BA/BAM AC'97 Modem (rev 05)
> 
> Details:
> 
> 00:1f.6 Modem: Intel Corp. 82801BA/BAM AC'97 Modem (rev 05) (prog-if 00 
> [Generic])
>         Subsystem: SILICON Laboratories: Unknown device 4c27
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 10
>         Region 0: I/O ports at de00 [size=256]
>         Region 1: I/O ports at dc00 [size=128]
> 
> 00:1f.6 Class 0703: 8086:2446 (rev 05)
>         Subsystem: 1543:4c27
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 10
>         Region 0: I/O ports at de00 [size=256]
>         Region 1: I/O ports at dc00 [size=128]
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hsflinux
>