[hsflinux] MC97 Problems...

[Marc Boucher]

just to be precise; the chip identifies itself as a Silicon Laboratories
device; however some users with similar chips have reported that their
modem appeared as a Lucent modem under Windows.

Apparently Motorola has been using Silicon Labs chips as well.
See
	http://www.idir.net/~gromitkc/motorola/motorola_sm56acl.html

Perhaps their AMR Linux driver might work for you.

Marc


On Wed, Sep 25, 2002 at 12:58:54PM -0400, Marc Boucher wrote:
> You seem to have a Lucent AC97 modem. Our driver only supports
> Conexant devices.
> 
> Marc
> 
> On Wed, Sep 25, 2002 at 12:34:50PM -0400, Emilio Recio wrote:
> > So I recompiled from source, and I get the same problem with com ctrl. 
> > If someone can explain what the ERROR: below means, I would greatly 
> > appreciate it. Does it mean that the my modem on the mini-book pc is 
> > completely useless?
> > 
> > PCI: Found IRQ 10 for device 00:1f.6
> > PCI: Sharing IRQ 10 with 00:1f.3
> > PCI: Sharing IRQ 10 with 00:1f.5
> > PCI: Setting latency timer of device 00:1f.6 to 64
> > HSF: MC97 VendorId1=0x5349 VendorId2=0x4c27
> > ERROR: did not find a supported MC97 controller ! (0x5349:0x4c27)
> > hsf_request_port: ComCtrlOpen failed, r=1!
> > 
> > Note: I am not using the audio device at all.
> > 
> > 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 05)
> > 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
> > 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
> > 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
> > 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
> > 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
> > 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio 
> > (rev 05)
> > 00:1f.6 Modem: Intel Corp. 82801BA/BAM AC'97 Modem (rev 05)
> > 
> > Details:
> > 
> > 00:1f.6 Modem: Intel Corp. 82801BA/BAM AC'97 Modem (rev 05) (prog-if 00 
> > [Generic])
> >         Subsystem: SILICON Laboratories: Unknown device 4c27
> >         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B-
> >         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> > >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> >         Latency: 0
> >         Interrupt: pin B routed to IRQ 10
> >         Region 0: I/O ports at de00 [size=256]
> >         Region 1: I/O ports at dc00 [size=128]
> > 
> > 00:1f.6 Class 0703: 8086:2446 (rev 05)
> >         Subsystem: 1543:4c27
> >         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B-
> >         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> > >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> >         Latency: 0
> >         Interrupt: pin B routed to IRQ 10
> >         Region 0: I/O ports at de00 [size=256]
> >         Region 1: I/O ports at dc00 [size=128]
> > 
> > _______________________________________________
> > hsflinux mailing list
> > hsflinux at lists.mbsi.ca
> > http://www.mbsi.ca/mailman/listinfo/hsflinux
> > 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hsflinux
>