[hsflinux] Problem with gcc 3.2?

[Markus Gaugusch]

Hi, I have an Ambit56k Softmodem in my vaio laptop (I had email contact
about it with Marc 8 months ago or something). It worked ok (but I haven't
used it for some time time), but now I'm using SuSE 8.1 with gcc 3.2.

Although you seem to take care of it (reading your webpage), I suspect it
to be a problem. Neither my 2.4.18 nor 2.4.20 kernel work (with or without
acpi enabled) with the modem.

Here some messages (from hsflinmodem 5.03.03 and 5.03.27)
--- 5.03.03
PCI: Found IRQ 10 for device 00:07.6
IRQ routing conflict for 00:07.5, have irq 5, want irq 10
IRQ routing conflict for 00:07.6, have irq 5, want irq 10
PCI: Sharing IRQ 10 with 00:0a.1
PCI: Sharing IRQ 10 with 00:10.0
PCI: Setting latency timer of device 00:07.6 to 64
HSF: MC97 VendorId1=0x4144 VendorId2=0x5348
ERROR: did not find a supported MC97 controller ! (0x4144:0x5348)
hsf_request_port: ComCtrlOpen failed, r=1!
--- 5.03.27
PCI: Found IRQ 10 for device 00:07.6
IRQ routing conflict for 00:07.5, have irq 5, want irq 10
IRQ routing conflict for 00:07.6, have irq 5, want irq 10
PCI: Sharing IRQ 10 with 00:0a.1
PCI: Sharing IRQ 10 with 00:10.0
PCI: Setting latency timer of device 00:07.6 to 64
HSF: ERROR: No CONEXANT modem found
hsf_request_port: open failed
---
Are there any module parameters to get some more output?
At the moment I don't even get any messages when loading the modules
(though they load and unload fine).
I also tried in single user mode, without sound drivers loaded, etc.
Any hints?

thanks!
Markus

-- 
__________________    /"\
Markus Gaugusch       \ /    ASCII Ribbon Campaign
vaio at gaugusch.at       X     Against HTML Mail
                      / \