[hsflinux] Need help with Linux Redhat 2.4.20 and Conexant HSF

[Marc Boucher]

Ciao Giorgio

Please try the latest version first (hsfmodem-6.03.00lnxt03091600)
since we recently fixed a timing issue with the ATD command.
If it still doesn't work, please email modem.support at linuxant.com
the output of "hsfconfig --dumpdiag".

Thanks
Marc

On Thu, Sep 18, 2003 at 12:02:10PM +0200, Matterazzo Giorgio wrote:
> Hi, I've searched all the archives without result.
> I've Compaq evo N1020v equipped by a Conexant HSF 56k HSFi Modem (rev 1) and
> running Linux Red Hat 8 with kernel 2.4.20-18.9.
> 
> I've installed the driver hsflinmodem-5.03.27lnxtbeta03042700 and it works
> ok except to establish a data connection with a GSM phone (Vodafone). I
> almost always obtain a NO CARRIER error after the negotiation. I've tried
> all settings without result.
> 
> Then I've installed the driver hsfmodem-6.03.00lnxt03091001free with no
> errors. I use microcom to send AT command to modem. With this driver the
> modem responds to AT commands but isn't able to dial or RING. For example
> with the command ATDxxxxxxx (or ATDxxxxxx;) I obtain an OK from modem but
> the call isn't done. And if I call the telephone number line connected to
> modem I don't obtain a RING response from modem.
> 
> Can anyone give me a suggestion?
> Thanks a lot,
> bye,
> Giorgio
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux
>