[hsflinux] HSF with USR 5660A, connection extremely slow and unreliable

[Timothee Besset]

No .. with either of those two init lines, the modem can't seem to negociate with the server. After dialing it just keeps being noisy and never connects me. I tried other variations, but all it gives me is a failure to connect with a NO_CARRIER response

TTimo

On Mon, 06 Dec 2004 13:23:06 +0000
"Linuxant support (Jonathan)" <support at linuxant.com> wrote:

> Hi,
> 
> the V32B modulation does support 14.4kbps connections but as you 
> reported, it seems that you are connect at 7200bps in the logs you have 
> sent us.
> 
> You could try to dial to another modem to see if you have the same 
> problem. You could also try one of the following init. strings :
> 
> ---
> AT &F W1 +ER=1; +DR=1; +MS=V32B,0,14400,14400,14400,14400
> AT &F W1 +ER=1; +DR=1; +MS=V32B,1,14400,14400,14400,14400
> ---
> 
> Regards,
> 
> 
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
> 
> 
> Timothee Besset wrote:
> > Hello,
> > 
> > I am trying the FREE version of the HSF driver to see if I can use it to get my dial-up working under Linux. Modem is a USR 5660A, which I have configured and working great under windows.
> > 
> > I am aware that the drivers will be limited to 14Kbits until I get a License, however atm all I can get appears to be 7200 from the logs, and like 2400 from the usage feeling.
> > 
> > I have tried talking to the modem to get configuration information ( see hsfconnect.log ) and configure things a bit better, but all I can see is V32B at 7200 bauds?
> > 
> > TTimo
> > 
> > 
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > hsflinux mailing list
> > hsflinux at lists.linuxant.com
> > https://www.linuxant.com/mailman/listinfo/hsflinux
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux