[hsflinux] HSF modem Sony Vaio PCG-FR215E

[Rudy]

Hi list!
I bought a Sony Vaio PCG-FR215E and read it has a Conexant AC97 modem
for VIA.

ListMdm v.1.6 says:
=====================================================================
=              SYSTEM INFORMATION                                   =
=====================================================================
Date         : 6/18/2003
ListMdm Ver  : 1.6
Windows OS   : Microsoft Windows XP
Build Number : 2600

=====================================================================
=              RESULT OF MODEM QUERY                                =
=====================================================================
NUMBER OF MODEMS FOUND = 1

MODEM #1:
     PCI CONFIGURATION INFORMATION READ:
        VENDOR ID              : 1106
        DEVICE ID              : 3068
        SUBVENDOR ID           : 104D
        SUBDEVICE ID           : 8143
        REVISION ID            : 80

     DEDUCED INFORMATION:
        VENDOR NAME            : VIA
        DEVICE NAME            : VIA
        SUBVENDOR NAME         : SONY -- HTTP://WWW.SONY.COM
        MODEM TYPE             : UNKNOWN
        WINXP INBUILD SUPPORT  : NO

I downloaded SuSE 8.2/athlon precompiled rpm
(hsflinmodem-5.03.27lnxtbeta03042700k2.4.20_4GB_athlon-1suse.i586), got
it installed in a few seconds, no errors, but cannot connect to my ISP.
The modem accepts AT commands, answers OK, but there's no sound from the
speakers (VIA/AC97) when dialing and eventually it comes up with a "NO
CARRIER" (if I dial ATX3DT...) or "NO DIALTONE".
Kernel modules are up, config looks good, set up for Italy.
I tried with noapic, acpi=off, apm=off... no way.

My Windos XP driver connects with the following modem commands:
06-18-2003 21:36:32.403 - Invio: 	AT<cr>
06-18-2003 21:36:32.413 - Ricezione:	<cr><lf>OK<cr><lf>
06-18-2003 21:36:32.413 - risposta interpretata: OK
06-18-2003 21:36:32.423 - Invio: 	AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W2<cr>
06-18-2003 21:36:32.433 - Ricezione:	<cr><lf>OK<cr><lf>
06-18-2003 21:36:32.433 - risposta interpretata: OK
06-18-2003 21:36:32.453 - Invio: 	ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;X4<cr>
06-18-2003 21:36:32.463 - Ricezione:	<cr><lf>OK<cr><lf>
06-18-2003 21:36:32.463 - risposta interpretata: OK
06-18-2003 21:36:32.463 - Composizione del numero in corso.
06-18-2003 21:36:32.473 - Invio: 	ATDT##########<cr>
06-18-2003 21:37:10.287 - Ricezione:	<cr><lf>+MCR: V92<cr><lf>
06-18-2003 21:37:10.287 - risposta interpretata: Informativo
06-18-2003 21:37:10.287 - Ricezione:	<cr><lf>+MRR: 41333<cr><lf>
06-18-2003 21:37:10.287 - risposta interpretata: Informativo
06-18-2003 21:37:10.868 - Ricezione:	<cr><lf>+ER: LAPM<cr><lf>
06-18-2003 21:37:10.868 - risposta interpretata: Informativo
06-18-2003 21:37:10.868 - Ricezione:	<cr><lf>+DR: V44<cr><lf>
06-18-2003 21:37:10.868 - risposta interpretata: Informativo
[CONNECT...]

I cast the same connection strings into .wvdialrc, but nothing happened.
There's some info collected from Linux as attachment, hope it helps.

What can I do now?

Thank you

--
Rudy
(Italy)


-------------- next part --------------
<#UG VERSION=1>
<UNIMODEM VERSION=10>
<CALL SETUP RESULT=Detected No Recognizable Tone>
<MULTIMEDIA MODE=Data Only>
<DTE-DCE MODE=Async data>
<V.8 CM octet string="">
<V.8 JM octet string="">
<RX SIG POWER DB=0, TX SIG POWER DB=0, S/N RATIO DB=0>
<NORMALIZED MEAN SQUARED ERROR=0>
<NEAR ECHO LOSS=0>
<FAR ECHO LOSS=0>
<FAR ECHO DELAY=0>
<ROUND TRIP DELAY=0>
<V.34 INFO bit map =0>
<TX MOD=V.17, TX SYMBOL RATE=0, TX CARRIER FREQ=0>
<RX MOD=V.17, RX SYMBOL RATE=0, RX CARRIER FREQ=0>
<TX FIRST DATA RATE=0, RX FIRST DATA RATE=0>
<CARRIER LOSS=0, RATE RENEG=0>
<RETRAINS REQ=0, RETRAINS DET=0>
<TX FINAL RATE=0, RX FINAL RATE=0>
<PROTOCOL NEGOTIATION=None>
<EC FRAME SIZE=0>
<EC LINK TIMEOUTS=0>
<EC LINK NAKS=0>
<COMPRESSION NEGOTIATION=None>
<COMPRESSION DICTIONARY SIZE=0>
<TX FLOW CONTROL=0>
<RX FLOW CONTROL=0>
<TX CHARS SENT FROM DTE=0>
<RX CHARS SENT TO DTE=0>
<TX CHARS LOST=0>
<RX CHARS LOST=0>
<TX FRAME COUNT=0>
<RX FRAME COUNT=0>
<TX FRAME ERROR COUNT=0>
<RX FRAME ERROR COUNT=0>
<TERMINATION CAUSE=No previous call>
<LSD Vdd=0, Power Bits=0>
<V8BIS FLEX VERSION=0, V8BIS DSP VERSION=0>
<RATE RENEG REQ=0, RATE RENEG DET=0>
<HIGH PASS FILTER ENABLED=0>
<ROBBED BIT PATTERN=0>
<DIGITAL PAD DETECTED=0, DIGITAL LOSS ESTIMATE=0>
<Cnt1=0, Det1=0, Res1=0>
<EQM=0, TRAINING EQM SUM=0>
<DIB ERROR COUNTERS=0, 0, 0, 0, 0, 0, 0, 0>
<RETRAIN/HDLC RESET=0>


-------------- next part --------------
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0e.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
00:0e.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
00:0e.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go] (rev a3)


-------------- next part --------------
Linux speedster 2.4.20-4GB-athlon #1 Wed Apr 16 14:44:03 UTC 2003 i686 unknown unknown GNU/Linux