[hsflinux] HSF modem picks up line but Does Not Dial

[Linuxant support (Jonathan)]

Hi,

please try to use the 'AT &F X1' init. string to see if there is a 
difference. You should also make sure that the right country is selected 
with the 'hsfconfig --country' command in a root shell.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



Rudi Siegling wrote:
> Hi,
> 
> I've got an HSF (conexant modem):
>>From ModemData.txt (scanModem)
> Class 0780: 14f1:2f10   Communication controller: Conexant: Unknown
> device 2f10 (rev 01)
>   SubSystem 16ec:2013  U.S. Robotics: Unknown device 2013
> 
> and loaded the linuxant (HSF) driver.
> 
> Using KInternet, my modem picks up the line (I hear the dial tone on the
> internal speaker) when given atdt1234
> (1234 as example, or whichever number I have to dial). The modem does
> not proceed to actually dial the number given, but times out giving the
> message "No Carrier"
> I have tried it with and without "Detect Dial Tone" selected through
> YaST (Suse 9.3)
> 
> I have also tried dialing out using kppp's Mini-Terminal. I can get the
> modem to pick up the line, but nothing else.
> 
> Any suggestions would be appreciated.
> 
> Regards
> 
> Rudi Siegling
> 
> The process waits right after:
> pppd[0]: --> Modem initialized.
> pppd[0]: --> Sending: ATDT8628895
> pppd[0]: --> Waiting for carrier.
> pppd[0]: ATDT8628895 
> then timeouts with then next line
> pppd[0]: NO CARRIER
> 
> Below is the log generated by KInternet. 
> 
> SuSE Meta pppd (smpppd-ifcfg), Version 1.58 on linux.
> Status is: disconnected
> trying to connect to smpppd
> connect to smpppd
> Status is: disconnected
> Status is: connecting
> pppd[0]: Plugin passwordfd.so loaded.
> pppd[0]: --> WvDial: Internet dialer version 1.54.0
> pppd[0]: --> Initializing modem.
> pppd[0]: --> Sending: ATZ
> pppd[0]: ATZ
> pppd[0]: OK
> pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> pppd[0]: OK
> pppd[0]: --> Sending: ATM1
> pppd[0]: ATM1
> pppd[0]: OK
> pppd[0]: --> Sending: ATX3
> pppd[0]: ATX3
> pppd[0]: OK
> pppd[0]: --> Modem initialized.
> pppd[0]: --> Sending: ATDT8628895
> pppd[0]: --> Waiting for carrier.
> pppd[0]: ATDT8628895
> pppd[0]: NO CARRIER
> pppd[0]: --> No Carrier!  Trying again.
> pppd[0]: --> Sending: ATDT8628895
> pppd[0]: --> Waiting for carrier.
> pppd[0]: ATDT8628895
> Status is: disconnecting
> pppd[0]: Connect script failed
> Status is: disconnected
> pppd[0] died: Connect script failed (exit code 8)
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux